by Darkside » Sun Jan 08, 2017 10:24 am
The spacer is just a piece of alum 1/4" ID tubing about an inch long. you need a longer bolt to attach the beta number plate to the top triple. You need to use a heat gun at the base of the plate where it fits to the fender. just heat it and push down on it to get it to squat so the top mounting hole lines up with the triple. I put a piece of sticky back foam rubber on the inside of the number plate where it touches the computer
Randy
2018 390 rrs, 2014 300 rr re, 2010 ktm 450 exc