bent my radiator, what should i do?
15 posts
• Page 2 of 2 • 1, 2
Re: bent my radiator, what should i do?
by Hyde » Mon Oct 20, 2014 2:23 pm
Someone made off with my wood blocks.
- Attachments
-
- radiatorfix.jpg (229.67 KiB) Viewed 5012 times
23" 250RE
21' 350RE
20', 200rr, gone
20', 250rr, Ye-haw !
18', 250rr,gone
18' 125rr, KYB forks, gone
16' 250rr, KYB forks-sold
15' 250rr RE-sold
14' 450rr, gone
14' 250rr-sold
14' 450rr KYB forks.
21' 350RE
20', 200rr, gone
20', 250rr, Ye-haw !
18', 250rr,gone
18' 125rr, KYB forks, gone
16' 250rr, KYB forks-sold
15' 250rr RE-sold
14' 450rr, gone
14' 250rr-sold
14' 450rr KYB forks.
- Hyde
- Posts: 390
- Joined: Wed Sep 04, 2013 6:45 am
Re: bent my radiator, what should i do?
by flybars » Thu Oct 23, 2014 1:06 pm
If U guys would go back to the first pic of the radiator, I would like to point out the upper thin metal crossmember on the front of the rad. See how it is cut almost all the way thru? This is where the horn bracket is partially attached. I removed my horn because of this, and bet all our bikes have the same problem. Just a heads up.
'14 300rr
- flybars
- Posts: 281
- Joined: Tue Jul 30, 2013 9:03 pm
- Location: Cashmere, WA, USA
Re: bent my radiator, what should i do?
by Mslow » Thu Oct 23, 2014 6:38 pm
flybars wrote:If U guys would go back to the first pic of the radiator, I would like to point out the upper thin metal crossmember on the front of the rad. See how it is cut almost all the way thru? This is where the horn bracket is partially attached. I removed my horn because of this, and bet all our bikes have the same problem. Just a heads up.
This bike has never been ridden with the horn on it.
Removed it the day I bought it.
2014 300rr
- Mslow
- Posts: 120
- Joined: Wed Dec 18, 2013 10:08 am
Re: bent my radiator, what should i do?
by flybars » Fri Oct 24, 2014 8:30 am
Mine is cut about half way thru. Must be a photo blem on yours.
'14 300rr
- flybars
- Posts: 281
- Joined: Tue Jul 30, 2013 9:03 pm
- Location: Cashmere, WA, USA
Re: bent my radiator, what should i do?
by Hyde » Sat Oct 25, 2014 8:31 am
Those round cross braces are really soft, they'll also pull straight with the vise.
23" 250RE
21' 350RE
20', 200rr, gone
20', 250rr, Ye-haw !
18', 250rr,gone
18' 125rr, KYB forks, gone
16' 250rr, KYB forks-sold
15' 250rr RE-sold
14' 450rr, gone
14' 250rr-sold
14' 450rr KYB forks.
21' 350RE
20', 200rr, gone
20', 250rr, Ye-haw !
18', 250rr,gone
18' 125rr, KYB forks, gone
16' 250rr, KYB forks-sold
15' 250rr RE-sold
14' 450rr, gone
14' 250rr-sold
14' 450rr KYB forks.
- Hyde
- Posts: 390
- Joined: Wed Sep 04, 2013 6:45 am
15 posts
• Page 2 of 2 • 1, 2
Return to General Discussions & Announcements
Who is online
Users browsing this forum: Majestic-12 [Bot] and 49 guests