2016 500RS?

General Announcements, General Questions, e.g. What bike do I buy?, etc.

Re: 2016 500RS?

Postby dslbrnr » Wed Sep 21, 2016 9:06 am

Dang Rick, I think we need to see some pics of your Italian beauties. I bet you have a nice collection.
2016 500RS, Enduro Engineering Skid plate, Cycra Handguards, Cleaned Up Tail Section, 13T/50T Gearing, IMS 3.1 Gal Fuel Tank
dslbrnr
 
Posts: 42
Joined: Mon Aug 22, 2016 9:10 am
Location: Temecula CA. USA

Re: 2016 500RS?

Postby dslbrnr » Wed Sep 21, 2016 2:13 pm

Well the tank came in so I thought I would pull the sending unit and do an ohm test. The sending unit is fine however there was a loose zip-ty inside the fuel tank which could have been tangled around the sending unit float. I also saw where you guys were talking about the sending unit plug/connection could have been boogered up. Well with the sending unit in my hand and properly plugged in, it worked by manually moving the float up and down :D

Now if they would use some good O-rings I would be overjoyed as I have had to replace two on the engine already (oil fill plug and Gear oil check screw). My local dealer carries almost no spare parts yet, so everything has to be ordered.

Thanks again for your expertise
2016 500RS, Enduro Engineering Skid plate, Cycra Handguards, Cleaned Up Tail Section, 13T/50T Gearing, IMS 3.1 Gal Fuel Tank
dslbrnr
 
Posts: 42
Joined: Mon Aug 22, 2016 9:10 am
Location: Temecula CA. USA

IMS 3 Gal Tank Pics

Postby dslbrnr » Sat Sep 24, 2016 2:42 pm

Install went pretty smooth and no leaks!!
Attachments
IMG_0727.JPG
IMG_0727.JPG (48.31 KiB) Viewed 7782 times
2016 500RS, Enduro Engineering Skid plate, Cycra Handguards, Cleaned Up Tail Section, 13T/50T Gearing, IMS 3.1 Gal Fuel Tank
dslbrnr
 
Posts: 42
Joined: Mon Aug 22, 2016 9:10 am
Location: Temecula CA. USA

IMS Tank

Postby dslbrnr » Sat Sep 24, 2016 2:44 pm

IMG_0728.JPG
IMG_0728.JPG (40.45 KiB) Viewed 7782 times
2016 500RS, Enduro Engineering Skid plate, Cycra Handguards, Cleaned Up Tail Section, 13T/50T Gearing, IMS 3.1 Gal Fuel Tank
dslbrnr
 
Posts: 42
Joined: Mon Aug 22, 2016 9:10 am
Location: Temecula CA. USA

IMS Tank

Postby dslbrnr » Sat Sep 24, 2016 2:46 pm

IMG_0729.JPG
IMG_0729.JPG (46.13 KiB) Viewed 7782 times
2016 500RS, Enduro Engineering Skid plate, Cycra Handguards, Cleaned Up Tail Section, 13T/50T Gearing, IMS 3.1 Gal Fuel Tank
dslbrnr
 
Posts: 42
Joined: Mon Aug 22, 2016 9:10 am
Location: Temecula CA. USA

Re: 2016 500RS?

Postby dslbrnr » Sun Sep 25, 2016 3:38 pm

After one day with the new tank, my low fuel light came back on :shock:
Looks like I have a bad float because it doesn't float no more, it just sinks down and triggers the low fuel light. Apparently there's a leak in the little float that goes up and down. Hopefully the dealer will just order a new one for me.
2016 500RS, Enduro Engineering Skid plate, Cycra Handguards, Cleaned Up Tail Section, 13T/50T Gearing, IMS 3.1 Gal Fuel Tank
dslbrnr
 
Posts: 42
Joined: Mon Aug 22, 2016 9:10 am
Location: Temecula CA. USA

Re: 2016 500RS?

Postby dslbrnr » Mon Sep 26, 2016 1:38 pm

I will be doing the Alpine Trails Ride this coming weekend from Jawbone Canyon Ca. to Kernville. This will be my first organized Enduro ride and putting my 500RS through it's paces. I've logged about ten hours so far so after this ride I should be pretty well broke-in.

Hope to see some of you guys on Betas there and I'll try and get some pic's to post up.

I can't seem to get instant notifications on replies to my post, does anyone know how besides enabling it in the user control panel.
Thx
2016 500RS, Enduro Engineering Skid plate, Cycra Handguards, Cleaned Up Tail Section, 13T/50T Gearing, IMS 3.1 Gal Fuel Tank
dslbrnr
 
Posts: 42
Joined: Mon Aug 22, 2016 9:10 am
Location: Temecula CA. USA

Re: 2016 500RS?

Postby johnm28 » Mon Sep 26, 2016 2:32 pm

Il be there too. See you there. It will be cool to see some more beta's. don't know about instant reply so cant help with that one. Mark
johnm28
 
Posts: 40
Joined: Fri Jun 05, 2015 8:17 pm
Location: LAGUNA HILLS CA

Re: 2016 500RS?

Postby ricoyam » Mon Sep 26, 2016 6:00 pm

dslbrnr wrote:Dang Rick, I think we need to see some pics of your Italian beauties. I bet you have a nice collection.


I have photos of everything I've owed that I have photos of on my Facebook page. I can't post any photos here without resizing them so I'll probably not be sharing them here.
Rick "Rico" Yamane
'15 430 RS
+20 or so others
S.F. Peninsula
Mechanic/Restorer Chris Carter Motorcycle Collection
ricoyam
 
Posts: 514
Joined: Mon Nov 18, 2013 12:45 am

Re: 2016 500RS?

Postby dslbrnr » Mon Sep 26, 2016 9:21 pm

johnm28 cool, hope to see you there as well. Should be a great ride and good weather.

ricoyam yeah I here you about posting pic's on here. I don't have facebook but my wife does, I'll have her take a look. I wish I would have kept pic's of all the bikes I've owned over the past 45 years. I think I was twelve when I got a used Montgomery ward 50 and I was hooked. Wish I had that now, I think it was made by Benelli.
2016 500RS, Enduro Engineering Skid plate, Cycra Handguards, Cleaned Up Tail Section, 13T/50T Gearing, IMS 3.1 Gal Fuel Tank
dslbrnr
 
Posts: 42
Joined: Mon Aug 22, 2016 9:10 am
Location: Temecula CA. USA

PreviousNext

Return to General Discussions & Announcements

Who is online

Users browsing this forum: No registered users and 106 guests