Hey Y'all, I'm prepping my 2021 300RR Race and I can't figure out a good location for my aftermarket (Works Connection) hour meter. Any suggestions?
Oh year, was it in 2020 that Beta started putting on Safety Torx/Bolts? I noticed one on the head and another on the powervalve cover... Just curious, it wasn't on my 2016.
Thanks
Bob
Aftermarket Hour Meter Location
4 posts
• Page 1 of 1
Aftermarket Hour Meter Location
by bzrperfspec77 » Thu Jan 21, 2021 1:34 pm
- bzrperfspec77
- Posts: 7
- Joined: Sun Feb 14, 2016 7:23 pm
- Location: Granville, MA
Re: Aftermarket Hour Meter Location
by wwguy » Fri Jan 22, 2021 5:27 pm
I mounted mine with double-sided tape to the frame tube on the LH side, just behind the steering head and above the radiator. It's been there several years now with no issues.
- wwguy
- Posts: 288
- Joined: Thu Apr 28, 2016 12:59 pm
- Location: Boise, ID USA
Re: Aftermarket Hour Meter Location
by bzrperfspec77 » Mon Jan 25, 2021 6:21 pm
Nice, ok. Thanks
I ended up drilling into the old horn holder and mounted it there for now... We'll see how it goes.
I ended up drilling into the old horn holder and mounted it there for now... We'll see how it goes.
- bzrperfspec77
- Posts: 7
- Joined: Sun Feb 14, 2016 7:23 pm
- Location: Granville, MA
Re: Aftermarket Hour Meter Location
by Hyde » Sun Jan 31, 2021 8:42 am
I put mine in the air box.
23' 430RE
23' 250RE
21' 350RE
20', 200rr, gone
20', 250rr, Ye-haw !
18', 250rr,gone
18' 125rr, KYB forks, gone
16' 250rr, KYB forks-sold
15' 250rr RE-sold
14' 450rr, gone
14' 250rr-sold
14' 450rr KYB forks.
23' 250RE
21' 350RE
20', 200rr, gone
20', 250rr, Ye-haw !
18', 250rr,gone
18' 125rr, KYB forks, gone
16' 250rr, KYB forks-sold
15' 250rr RE-sold
14' 450rr, gone
14' 250rr-sold
14' 450rr KYB forks.
- Hyde
- Posts: 392
- Joined: Wed Sep 04, 2013 6:45 am
4 posts
• Page 1 of 1
Return to General Discussions & Announcements
Who is online
Users browsing this forum: Tennbeta and 212 guests