Apologies if this has been asked numerous times but I did search and couldn't find anything.
Regarding my 22MY Xtrainer 300 which has an oil pump. The attachment is from the PDF owners manual supplied with the bike. Are Beta suggesting I should also be mixing oil at 100-1 in the first tank? My dealer never mentioned it and this just seems very strange to me.
I know I've only got 0.3hrs (4.2 miles) atm but I was sure the oil level in the bottle hadn't moved at all which was concerning me especially after reading the above! However I've just watched it idling in the garage and a small air bubble about 3 inches from the rubber inlet boot injection point moved round the pipe a couple of inches in a min or so, so it must be working, right?
The dealer filled the bottle with Motorex Cross Power (Not Ligui Moly) I was happy enough with that as that's what I premix in my EXC200, I realise not all 2t oils are the same but it that should be fine, right?
Any thoughts welcome, thanks.