Re: bent my radiator, what should i do?
Posted: Mon Oct 20, 2014 2:23 pmSomeone made off with my wood blocks.
Beta Riders Club Discussion Forum
betarider.org
http://betarider.org/forum/
bent my radiator, what should i do?
Page 2 of 2
Posted: Mon Oct 20, 2014 2:23 pmRe: bent my radiator, what should i do?
Posted: Thu Oct 23, 2014 1:06 pmIf U guys would go back to the first pic of the radiator, I would like to point out the upper thin metal crossmember on the front of the rad. See how it is cut almost all the way thru? This is where the horn bracket is partially attached. I removed my horn because of this, and bet all our bikes have the same problem. Just a heads up.
Re: bent my radiator, what should i do?
Posted: Thu Oct 23, 2014 6:38 pmflybars wrote:If U guys would go back to the first pic of the radiator, I would like to point out the upper thin metal crossmember on the front of the rad. See how it is cut almost all the way thru? This is where the horn bracket is partially attached. I removed my horn because of this, and bet all our bikes have the same problem. Just a heads up.
This bike has never been ridden with the horn on it.
Removed it the day I bought it.
Re: bent my radiator, what should i do?
Posted: Fri Oct 24, 2014 8:30 amMine is cut about half way thru. Must be a photo blem on yours.
Re: bent my radiator, what should i do?
Posted: Sat Oct 25, 2014 8:31 amThose round cross braces are really soft, they'll also pull straight with the vise.